Amorphous copolymer polycar bonate SP-2230

Polycarbonate (PC), as a material with superior comprehensive performance, has a wide range of applications including electronic devices, medical equipment, automotive parts, etc. However, it does not have the ability to resist the erosion of various chemical agents, which to some extent limits its application scope. In the post pandemic era, people's living habits have undergone earth shattering changes, and disinfectants have become important partners in daily life. Faced with the increasingly severe problem of chemical erosion, we have found a new solution - chemical resistant copolymer PC SP-2330&SP-1830. This material is modified by blending with general-purpose PC, ABS or PBT to form an alloy plastic, which has the properties of chemical resistance, low temperature impact resistance, lightweight thin-walled flame retardancy.
Purpose: SP-2330 is only used as a raw material for modified mixing and is not suitable for direct injection molding or compression molding applications.
Message
Product Detail


Product overview
Amorphous copolymer polycarbonate

unit
SP-2230

appearance

white pellet

MVR 300℃/1.2kg loading

g/10min

3

Low temperature ductility

℃
-60
other characteristics

good mold release、UV stable、

lightweight、thin wall、FR

Modified addition ratio       %

                                   15-30


SP-2230 Chemical resistance test data

This table is applicable to products modified by blending SP-2330 and general-purpose PC. Non flame retardant, 1.5mm V-0 and 1.2mm V-0.

医疗消毒剂

Healthcare Disinfectants

工业品

industrial products

家用化工用品

household chemical



Sani-cloth® AF3

Sani-cloth® PLUS

Sani-cloth® Bleach

Diversey Oxivir® TB

0.53% o-Phthalaldehyde

CaviCide®

Brembo® DOT5.1

ARMORALL®

Simple Green®

Banana Boat® SPF30

Lysol®

70% IPA

ethanol

NIVEA

SUN

Notched Izod Impact
@ -60C

样条形变率,

Strain

1%

1%

1%

1%

1%

1%

0%

1%

1%

1%

1%

1%

1%

1%


暴露天数，

Exposure days

7

7

7

7

7

7

3

7

7

7

7

7

7

7


Chemical agents

Quaternary ammonium salts

Quaternary ammonium salts

hypochlorite

Peroxygen

Aldehydes

Quaternary ammonium salts + IPA

Brake Fluid

vehicle Cleaner

household Cleaner

Sunscreen

household Cleaner

Disinfectants

alcohol

Sunscreen

ASTM D256

化学药剂描述

季铵盐

季铵盐

次氯酸盐

3%双氧水

醛类

季铵盐 + 异丙醇

制动液

清洁剂

家居清洁剂

防晒霜

家居清洁剂

消毒液

乙醇

防晒霜

J/m

实验材料

σyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεbσyεb

SP-2330耐化学PC

和通用PC改性材料

SP-2330 blend with BPA PC

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

648.9


PC material modified by SP-2330 blending and domestic 92 # gasoline tolerance test
Gasoline is a volatile, combustible mixture of hydrocarbons, a common chemical and solvent, fractionated and cracked from petroleum. Many amorphous thermoplastics break or degrade after contact with gasoline. The non-transparent grade SP-2330 and transparent grade SP-1830 of chemical-resistant polycarbonate developed by Yuan Chong Chemical underwent a series of gasoline contact resistance tests. The modified material mixed with SP-2330 and SP-1830 has a certain tolerance to gasoline contact. In addition to gasoline, SP-2330 and SP-1830 have good cracking resistance against a wider range of medical disinfectants, household disinfectants and chemicals. Please refer to the table below for details.

Environmental stress cracking is tested according to ASTM D543

Temperature: 23℃

Implementation method: saturation method

Deformation level

Duration of exposure

Yield strength retention rate

σy


Elongation at break retention rate

εb

SP-1830 transparent modified PC, non-flame retardant

0.5%

48hours

C

C

SP-2330 non-transparent modified PC, non-flame retardant

0.5%

48hours

C

C

1.0%

24hours

C

C

SP-2330 non-transparent modified PC, flame retardant 1.5mm V-0

0.5%

48hours

C

C

Ordinary transparent PC, non-flame retardant

0.5%

48hours

C

NC

PC/ABS, non-flame retardant

0.5%

48hours

C

NC

Siloxane copolymerization PC modification, siloxane content =4.5%

0.5%

48hours

C

NC

Biocompatibility test
The modified material mixed with SP-2330 and SP-1830 passed the following tests :(GB/T16886.10-2017 Part 10: Irritation and skin sensitization test for limited biocompatibility for skin contact applications), are suitable for lightweight applications of medical instruments and equipment.



Related products
YCFR-5111

YCFR-5111

YCFR-5111 additive is a halogen-free (especially fluorine free) pellets which is compliant with PFAS free regulations and GB/T5169.5-2020.

YCFR-5100

YCFR-5100 additive is a halogen-free (especially fluorine free) pellets which is compliant with PFAS free regulations and GB/T5169.5-2020.

YCFR-T200A

YCFR-T200A is a masterbatch which is made from special additive base on polycarbonate, suitable for comparative tacking index (CTI) =>600 V and UL94 1.5mm V-0 FR PC blend with high impact, high heat

Amorphous copolymer polycar bonate SP-2230

SP-2330 is a phosphor free and halogen free polycarbonate copolymer transparent pellets.